Description: The Single Valve Sampling Inlet has one metal sealed on-off valve mounted on a DN 40 CF, 2 inch ConFlat (CF) flange with a Swagelok type nut and ferrule fitting for connecting

Specifically designed non-Swagelok SilTite nuts, characterized by two notches on the outer surface of the nut. Get it as soon as Regulators.

Products > GC Accessories > Swagelok GC Fittings, Brass : Products Menu . Severe-Service Union-Bonnet Needle Valves, N Series and HN Series. We recommend Valves - Check/Relief. 1/32in ferrule and SS lock ring 10PK. The inner taper of the nut corresponds to the angle of the SilTite ferrule, $90.00. FITTING TYPE 1/8" - 1/16" ID Vespel/Graphite Standard 3/8", For example, a 1/16 ferrule For Use With (Equipment) Agilent HP, Perkin Elmer, Varian GC/MS, Use with 0.0625 in. Borosilicate Swagelok Tubing. Chemglass. GC Accessories. The ferrule is the primary sealing component of a compression fitting assembly, and they can be found in a wide variety of materials ranging from stainless steel to graphite. Attributes of these ferrule materials are summarized in Table 1. Swagelok 1/16" Nut and Ferrule Set, 10-pk. Call us +44 (0) 151 649 4000 .

Graphite G0.5 w/ 10pcs; inserting capillary column. Application Ideal for glass-to-metal connections - doesn't stick to glass. Customers who bought this product also bought. $54.60. Our end-to-end quality systemfrom sourcing, raw materials and tooling to continuous improvement and predictive maintenancehelps ensure the consistent quality that customers expect.

Graphite Furnace AA Supplies; Agilent Supplies for UV/VIS; Chemicals & Standards. How to Install Ferrules. Gas Line Installation Kit. Use these sleeves also known as ferrules with high-pressure compression nuts and fittings. Reusable if not overtightened. Use the following ferrules to connect PTFE and glass tubing. A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to 1/8" OD PTFE tubing when finger-tightened onto the precision-machined filter holder. forms strong grip with capillary column, cannot be reused. Preswage the ferrules onto the tube using a Swagelok multihead hydraulic swaging unit (MHSU). VG2, 60% Vespel/40% graphite blend offers the best combination of sealing and ease of workability. Valves - Switching/Crossover. KF Swagelok compatible Adaptor: KF ISO/CF Adapter: KF Valves: KF Safety Valves: KF overpressure prot.

www.chromres.com 45 Ferrules & Fittings Vespel/Graphite Ferrules 213105 213200 * Short ferrule for Agilent inlet systems; 4890, 5890 and 6890 Vespel/Graphite Ferrules- Sold in Greyhound Chromatography offers an extensive range of Gas Chromatography GC Ferrules and GC Seals in Graphite, Vespel/Graphite, Vespel, PTFE and SilTite materials. Gas Purification. Precision formed - flash-free ID. Glass chromatographic column require brass back ferrule, PTFE front ferrule and brass nuts for adequate sealing. Synonyms: Swagelok 204-1,BRASS BK Reusable if not overtightened. FITTING TYPE 1/8" - 1/16" ID Vespel/Graphite Ferrule . Precision formed - flash-free ID. Our graphite ferrules fit Swagelok or Parker 2.

5065-4454. 09200686 , 09200685 , 09200687. Standard 1/16" Ferrules. Features: Working pressures up to 10 000 psig (689 bar); Temperatures from 65 to 450F (53 to 232C) with PTFE Graphite Ferrules. Ferrules, graphite, 1,0mm id, for 0,53mm capillary columns, 10 pc/PAK . Swagelok and Parker 1/16-in fittings. Shimadzu Ferrules. PTFE Ferrules for Swagelok Type Fittings. As the nut is turned, the back ferrule advances the front ferrule and radially applies and effective tube grip. back; Millipore Sigma. Agilent Short Ferrules. The reason for matching materials is simple: You want the ferrules to be stronger than the tubing so that the ferrules can swage onto the tubing and lock into place. Graphite Ferrules from Ohio Valley.

Cat.No. Short Graphite/Vespel Ferrules - 0.625 in Nut, Pkg. A $1.8 billion, privately-held company, Swagelok Company designs, manufactures, and delivers an expanding range of the highest quality fluid system products and solutions. Upper temperature limit 450C. Since brass is an alloy of copper and zinc, you are still using like materials. 1 . Preswage the ferrules onto the tube using a Swagelok multihead hydraulic swaging unit (MHSU) . 2 . Apply the lubricant packaged with the fitting lightly to the body threads and the rear surface of the back ferrule . 3 . Insert the tube with preswaged ferrules into the fitting until the front ferrule seats against the $5,800. Ideal for glass-to-metal connections - doesn't stick to glass. Part Number: GSH05: OEM Number(s) 24828, 211175, GF-05-S, 221-32126-05, 8001-0212, 072635, 3007-14005: Material Graphite: Ferrule O.D. Make sure that the tubing rests firmly on the inner shoulder of the fitting and that the nut is finger-tight. Ferrules and Seals.

These 99.95% pure graphite ferrules can be removed and reused because they do not stick or bind onto tubing. Because these ferrules are harder, they do not distort and flow as much as other types and are ideal for butt type connections GFF ferrules require back ferrules when 100% Graphite Ferrules.

These ferrules are ideal for glass to metal connections. Vespel and Retention Gaps (deactivated FS Tubing) Septa for GC Injectors. HPLC Columns. The Swagelok@ nut attached to the trap has been stamped with a letter designation for identification. C. Soft; graphite is recommended for use with fused silica and glass. Use the removable ferrule on the inlet (top) end of the trap. The general swage tubing coupler has four parts namely the body, into which the tube is placed, two ferrules that is front ferrule and back ferrule and lastly a packing nut. 15% Graphite / 85% Vespel Ferrules. Browse Products Request Custom Products ISO Quality Credentials Patents & Trademarks Documentation Search. Use PTFE ferrules instead of brass or stainless steel ferrules when attaching fittings to glass tubing, or to flexible tubing (such as PTFE or Tygon). Shimadzu 100% graphite ferrule; upper temperature limit 450 deg. Choosing Packing Materials; Chossing Column Formats; VertiSep Series; Graphite C. 1/16 in. 1/16" Ferrule (long) 85% Vespel / 15% Graphite (10/pk) Upper temperature limit of 400 deg. Upper temperature limit 450C. Greyhound Chromatography offers an extensive range of Gas Chromatography GC Ferrules and GC Seals in Graphite, Vespel/Graphite, Vespel, PTFE and SilTite materials. Nuts and ferrules for packed columns Description Typical use Part number 1/8-inch id Swagelok stainless steel nut, front ferrule, back ferrule (20 each/pk) 1/8-inch column 5080-8751 1/8-inch Ferrule Set 1/8" Brass Swagelok (Set consists of 10 Front Ferrules and 10 Back Ferrules) Product Specifications; Products specifications. against the front ferrule as shown. Sample Cylinders. Sleeves for High-PressureCompression Fittings for Steel Tubing. valve: ISO Seals and Gaskets: KF Hoses with Flange: PVC Vacuum Hose and Swagelok, SGE Long Style SSNE Nuts: Width (English) 0.12 in. SGE Graphitized Vespel Ferrules 350 C-GVF. Shimadzu Graphite Ferrule Set 0.5 mm (10/Pk) - 221-32126-05 . HPLC & GC Ferrules for Chromatography: great selection of ferrules from numerous well known brands. Insert the tube with preswaged ferrules into the Graphpack 2M Ferrules For use w/Gerstel PTV inlet, Fits 0.25mm ID Columns, 10-pk. Standard iron ferrules Agilent offers a comprehensive selection of 100% graphite ferrules made for use with a variety of GC columns. TALUs ferrules are designed to be used primarily in Swagelok fittings. Description Tubing O.D. Products. Over tightening these fittings can easily lead to stripping the threads, Joywayus Compression Sleeve Ferrules 4mm Tube OD 2.9mm Tube ID Brass Compression Fitting and Insert Tube Ferrule Kit(Pack of 60) 4.2 out of 5 stars 42. Valco polymeric ferrules are available in a full range of materials, including some hard-to-find composites such as graphite-filled polyimide.. Needle Valve,Body:316SS, Union Bonnet, MWP:10,000psig, Packing:Graphite, Regulating Stem Tip, Conn.:3/8in. VG1, 85% Vespel/15% graphite blend offers equivalent composition to Agilent Vespel/graphite ferrules. We offer fast and reliable delivery at low costs. Search. Related Products: Borosilicate Glass Tube. A ferrule is a mainly cosmetic addition to a golf club that fits over the clubs shaft, forming a cosmetic transition between the hosel and shaft. All ferrules are thermally conditioned and ready for immediate high temperature GC use.

The filter element is replaceable.

Product information Description.

They will not stick to glass at higher temperatures. Shimadzu Graphite Ferrule Set 0.5 mm (10/Pk) - 221-32126-05. Product no. On copper tubing we suggest using brass ferrules and fittings.

Nickel Ferrule seal and are easily replaceable just like Graphite-Vespel Ferrules - but they have the non-contaminating properties of stainless steel. SilTite FingerTite GC Ferrules. 100% graphite ferrule; upper temperature limit 450 deg. Swage nut Step 1 Simply insert the tubing into the Swagelok Tube Fitting. Email Us. 3. the standard for GC/MS. Related Products: Borosilicate Glass Tube. Our compression fitting ferrule is decidedly corrosion and chemical resistant.

The inner taper of the nut corresponds to the angle of the SilTite ferrule, ensuring an even closure of the ferrule around the whole column eliminating leaks. One piece design requieres REST-23111. They are preferred over Graphite Ferrules for vacuum Recommended for mass spec transfer lines. The Gas Line Installation Kit includes everything you will need to connect a single gas cylinder to an SRI GC. Valves and Manifold Valves. Borosilicate Swagelok Tubing. C. Soft; graphite is recommended for use with fused silica and glass. Reusable if not overtightened. Register to request quotes or place orders. $50.47 overview 1/16" Ferrule (long) 85% Vespel / 15% Graphite (10/pk) Upper temperature limit of 400 deg. One piece design requieres no back ferrule. Kits and Tools for Maintenance. C. Soft; graphite is recommended for use with fused silica and glass. Swagelok Tube Fittings and Accessories; Tube Cutting tools; Tubing; General Laboratory supplies. Aspirators; Beakers; Bottle brushes, detergents, drainage racks; Graphite ferrule short For Use With (Equipment) Agilent HP, Perkin Elmer, Varian GC/MS, Use with 0.0625 in. Swagelok / Parker type fittings Ferrule size is approximately 3.5 mm long and 3.0 mm in diameter One piece design requires no back ferrule Quantity 3006-42710. The filter element is replaceable. Related Products: Sparge. Ferrule sizes refer to the size of the fittings into which they fit; they are not the diameter of the ferrule. When assembled correctly, Swagelok fittings form a leak tight seal and can be re- tightened many times. The position of the ferrule sets must be correct for the Swagelok fitting to work properly. The front ferrule must be placed such that the cone shape fits into the main body.

(SGE) Next They can be used with virtually any type of tubing or column including glass and fused silica. Swagelok, SGE Long Style SSNE Nuts: Width (English) 0.12 in. 1-800-555-8034 | View Catalog. Our end-to-end In the two-ferrule, mechanical grip design, the two ferrules separate sealing and tube gripping functions with each ferrule optimized for its function.

Specifically designed non-Swagelok SilTite nuts, characterized by two notches on the outer surface of the nut. Ferrules, graphite, 1,0mm id, for 0,53mm capillary columns, 10 pc/PAK . A $1.8 billion, privately-held company, Swagelok Company designs, manufactures, and delivers an expanding range of the highest quality fluid system products and solutions. The majority of

Advantages of Graphite Ferrules Our graphite ferrules fit Swagelok or Parker fittings. These ferrules are recommended for making leak-free connections between the GC column Shimadzu Ferrules. Graphite and polymeric ferrules have several advantages for use in gas chromatography over metal (especially hard metal) ferrules: They can seal against imperfect surfaces with little force.

For Use With (Application) High-purity Graphite - preferred for capillary GC use. Swagelok 3/8" unions and caps modified to accomodate the swelling of refractory membranes. High-purity Graphite - preferred for capillary GC use. When installed, the front ferrule creates a seal against the fitting body and on the outside diameter of the tubing. Polymeric ferrules. This durability ensures low maintenance, also in semiconductor and petrochemical industries. These ferrules are ideal for MS applications as their nonporous material prohibits oxygen contamination, and they can withstand temperatures as high as 350C. Medium & High Pressure Products.

LC Standard System Replacement Parts.

Products. Capillary Column Ferrules and Nuts; Ultra Inert Press Fits; View all; Agilent Instrument Specific Replacement Parts. Valves - Ball Shut Off. Graphite ferrules are soft and compliant. Fitting Size: 1/8 inch; Ferrule Inner Diameter: 1/8 inch Graphite Crucibles Inserts Scrubbing Tubes & Parts. Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses. non-stickability and crack resistance. OD tubing, and fits into standard 1/4 in. One piece design requieres Stainless Fitting SL Type Ferrule. Manufactured from For Use With (Application) The GC Maintenance Kit includes most parts which could fail, and is designed especially for our export customers who may have difficulty returning the GC to the factory for service. Ferrule, Graphite, 5 mm ID, for 5mm OD Glass Packed Columns-Inlet Liners-Inj & Det Adapters, 4 pack. The robust tube grip of the Swagelok tube fitting with its patented, two-ferrule technology is resistant to vibration fatigue and withstands high pressures and temperature extremes. 10 pack. 450C-GFF. Straight ferrule is for 1/4 in.

Precision ground OD tubing for use with PTFE ferrule Swagelok fittings. the Standard for GC/MS These Vespel ferrules contain 15% graphite and are ideal for glass and fused silica capillary columns. You are leaving the Swagelok North Carolina | East Tennessee site for the Swagelok corporate site. A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to 1/8" OD PTFE tubing when finger-tightened onto the precision-machined filter holder. Apply the lubricant packaged with the fitting lightly to the body threads and the rear surface of the back ferrule. Stable to 400 C. Graphite Ferrule OGF16-050, for Ideal for glass-to-metal connections - doesn't stick to glass. Price Range : 191.00 USD - 192.00 USD. 1/16F. Precision ground OD tubing for use with PTFE ferrule Swagelok fittings. Cylinder pressure regulator with 0-100 psi output, CGA gc ferrules, straight, reducing, capillary, 2hole, two hole, no hole, 100% graphite, for Swagelok 3006-41280. Graphite-Ferrules Listprice 38.00 Ferrule Set 1/8" Swagelok PTFE, 10 pieces.

C. 1/16 in. 316L SS NB Series Needle Valve,1/2 Female NPT, 6000psig (414bar), Graphite, 0.25" Orifice The same size brass back 1/8in. must re-tighten connection after initial temperature cycles.

Manufactured from the highest quality materials, in a huge range of sizes to suit all applications. They are also widely used in GC inlets and detectors as they can be reused and reinstalled due their resistance to deformation. The system consists of a brass back ferrule, a graphite/Vespel front ferrule, (which is available in three different hole sizes and a no hole version) and a brass nut. PTFE Ferrules. These are like Swagelok or Parker fitting that are brass of stainless steel, and sometimes use a graphite ferrule.

GRAPHITE VESPEL FERRULE FOR PY-2020 PK OF 5. Manufacturer: VESPel; Ideal for GC/MS interface applications Manufactured of 60% Vespel and 40% Graphite Vespel /Graphite Ferrules are 10. Standard 1/4" Ferrules. Vespel ferrules contain 15% graphite and are ideal for glass and fused silica capillary columns. PK. Standard 10 m porosity protects delicate pump components from particles but introduces very little. Reusable if not overtightened.

Valves - Diaphragm Shut Off. They withstand about twice as much pressure as sleeves for standard compression fittings, so 1/16in. $11.99 $ 11. low emissions - suitable for use with GC/MS interfaces. x 3/8in. Graphite ferrules are soft, easy to seal, stable to 450C, and contain no binders that might off-gas. sku: Stainless Fitting SL Type Ferrule. Part Number: 50-100169 PACK SIZE: Pk/10 38.32. Vespel and Vespel/Graphite composites. High-purity Graphite - preferred for capillary GC use. Swagelok / RECOMMEND INCLUDING ITEM #16-07204S (10PK) SKU: 01-30-40400 Categories: Air Sampling & Handling, Air Sampling Upper temperature limit 450C. The patented advanced-geometry back ferrule design provides a leak-tight tube connection on all Swagelok stainless steel tube fittings of identical sizes. Stainless Steel Tubing 1/8" AD x 1/16" ID. Swagelok Fitting, Brass 1/4" Nut and Ferrule Set, 20-pk. Ferrule Set 1/8" Brass Swagelok (Set consists of 10 Front Ferrules and 10 Back Ferrules) Product Specifications; Products specifications. 10. Graphite-Vespel ferrules are composed of 85% Vespel polyimide and 15% graphite. SUPELCO 3 Bulletin 741 Ferrules Select the best ferrule for your application: ferrules to the graphite ferrules you are 5065-4423. Long fittings and ferrules, SS, 10/PK. VG2, 60% Vespel/40% graphite blend offers the best combination of sealing and ease of workability. Browse Products Request Custom Products ISO Quality Credentials Patents & Trademarks Documentation Search. Reusable if not overtightened.

Short ferrules for use with the Clarus 590/690 Capillary Injector at temperatures up to 350 C. . 221-46403-92. Tubes Parts Ferrule, Front, Swagelok, Stainless, 1/8 inch, SS-203-1, 1 each. 99. Material Qty. Graphite Ferrule Set 0.5 mm, Pack of 10. Standard Standard 1/8" Ferrules. maximum temperature of 350 C. One-piece format ( but can be used if needed with a backing ferrule ( as a front ferrule) Originally specifically designed for Swagelok fittings ( as standard )_ In recent years these have been extended to included Metric Swageloks many Custom-made GraphiteFferrules - VESPel Vespel Graphite Straight Ferrules.

GC Injector Liners and Sleeves.

robust and hard material. GRAPHITE FERRULE NOZZLE FID,GC. For use with standard 1/4 in. Ferrules are used in laboratories for safely joining two components together, allowing liquids or gasses to pass through tubing without any of the substance escaping. One piece design requieres no back ferrule.

5065-4423. Ferrule sizes go by the fitting designation, which is determined by the ID in the fitting.

#0726282 (OGF4-16 GRAPHITE FERRULE PK10) 0100-1336 #0726283 (OGF8-16 GRAPHITE FERRULE PK10) 0100-1343 #S2041 (Swagelok Fitting, Type=Back Ferrule, Size (inches)=1/8, HPLC & GC Ferrules for Chromatography: great selection of ferrules from numerous well known brands. These polyimide-graphite ferrules and inserts can be used with stainless steel instrumentation quality compression fittings to promote the incorporation of PTFE in applications where the lubricity of PTFE presents challenges. High-purity Graphite - preferred for capillary GC use. Ferrule, 1/8 Graphite Vespel $ 11.40 Add to cart; Ferrule, 1/8 Brass, Swagelok $ 4.48 Add to cart; Monitor USB EV with Instructions $ 193.33 Add to cart; Flow Restrictor Assy, EV ID (1.5mm) is for 1/16 in. Ideal for glass-to-metal connections - doesn't stick to glass. VG1, 85% Vespel/15% graphite blend offers equivalent composition to Agilent Graphite Ferrule for Shimadzu 0.1-0.32mm ID Column (1) Graphite Vespel Ferrule for 0.1-0.25mm ID Columns for Shimadzu MS Use with 0.0625 in. $54.60. Use with and 3/8"

ID (1.5mm) is for 1/16 in. . See description and flows. Following the ferrules is the Swagelok nut. One piece design For use with standard 1/16 in. Types. OD tubing Ferrule fits into standard 1/16 in. Upper temperature limit 450C. 10pcs. Both the ferrules and insert can be used with various brands of compression fittings, which are available for purchase separately. Chemglass. Vespel/graphite ferrules work better for vacuum and high-pressure applications (e.g., GC/MS) because they will not fragment or allow oxygen to permeate into 100% graphite ferrule; upper temperature limit 450 deg. Find stainless steel graphite ferrules and related products for scientific research at MilliporeSigma 1/4" Graphite Ferrules from Ohio valley Specialty Company. They are made from 15% graphite/polyimide selected by . Valves - Bellows Shut Off. 1/4 Nickel 200 Ferrule. Their inherent softness and thermal expansion properties help to prevent column damage due to overtightening while maintaining a leak-free seal throughout temperature cycling. OD tubing Ferrule fits into standard 1/16 in. The Recommended for use with Detectors/Injectors at temperatures up to 350 C. For use with Swagelok tube fittings. Includes 6 nuts and 6 ferrules. HPLC & GC Ferrules for Chromatography: great selection of ferrules from numerous well known brands. 10pcs. Swagelok / Parker type This item: Swagelok SS-400-SET 316 Stainless Steel Ferrule Set for 1/4" Tube Fitting $8.09 Get it as soon as Monday, Jun 20 FREE Shipping on orders over $25 shipped by Amazon Quick View. : E21806.001E. Match stainless steel ferrules and fittings with stainless steel tubing, brass fittings and ferrules with copper tubing, and plastic fittings and ferrules with plastic tubing. To prevent overtightening, tighten ferrules finger tight plus half a turn at a time until gas tight. Ideal for glass-to-metal connections - doesn't stick to glass. Specify

Modified Swagelok unions and caps. to the Swagelok Tube Fitter's Manual (see page 8 of this bulletin).

Abrir chat